Chemical element of sodium

Educational institution

Summary

Subject: Sodium

Content

1. Introduction

2. Characteristics

2.1 Chemical properties

2.2 Compounds

2.3 Spectroscopy

2.4 Isotopes

3. History

4. Occurrence

5. Commercial production

6. Applications

7. Biological role

7.1 Maintaining body fluid volume in animals

7.2 Maintaining electric potential in animal tissues

8. Dietary uses

9. Precautions

10. Conclusion

11. References

1. Introduction

Sodium (pronounced /?so?di?m/, SOH-di-?m) is a metallic element with a symbol Na (from Latin natrium or Arabic natrun) and atomic number 11. It is a soft, silvery-white, highly reactive metal and is a member of the alkali metals within "group 1" (formerly known as `group IA'). It has only one stable isotope, 23Na.

Elemental sodium was first isolated by Sir Humphry Davy in 1806 by passing an electric current through molten sodium hydroxide. Elemental sodium does not occur naturally on Earth, but quickly oxidizes in air and is violently reactive with water, so it must be stored in an inert medium, such as a liquid hydrocarbon. The free metal is used for some chemical synthesis, analysis, and heat transfer applications.

Sodium ion is soluble in water in nearly all of its compounds, and is thus present in great quantities in the Earth's oceans and other stagnant bodies of water. In these bodies it is mostly counterbalanced by the chloride ion, causing evaporated ocean water solids to consist mostly of sodium chloride, or common table salt. Sodium ion is also a component of many minerals.

Sodium is an essential element for all animal life and for some plant species. In animals, sodium ions are used in opposition to potassium ions, to allow the organism to build up an electrostatic charge on cell membranes, and thus allow transmission of nerve impulses when the charge is allowed to dissipate by a moving wave of voltage change. Sodium is thus classified as a “dietary inorganic macro-mineral” for animals. Sodium's relative rarity on land is due to its solubility in water, thus causing it to be leached into bodies of long-standing water by rainfall. Such is its relatively large requirement in animals, in contrast to its relative scarcity in many inland soils, that herbivorous land animals have developed a special taste receptor for sodium ion.

Figure. 0. Silvery white metallic

2. Characteristics

At room temperature, sodium metal is soft enough that it can be cut with a knife. In air, the bright silvery luster of freshly exposed sodium will rapidly tarnish. The density of alkali metals generally increases with increasing atomic number, but sodium is denser than potassium. Sodium is a fairly good conductor of heat.

2.1 Chemical properties

Compared with other alkali metals, sodium is generally less reactive than potassium and more reactive than lithium,[2] in accordance with "periodic law": for example, their reaction in water, chlorine gas, etc.

Sodium reacts exothermically with water: small pea-sized pieces will bounce across the surface of the water until they are consumed by it, whereas large pieces will explode. While sodium reacts with water at room temperature, the sodium piece melts with the heat of the reaction to form a sphere, if the reacting sodium piece is large enough. The reaction with water produces very caustic sodium hydroxide (lye) and highly flammable hydrogen gas. These are extreme hazards (see Precautions section below). When burned in air, sodium forms sodium peroxide Na2O2, or with limited oxygen, the oxide Na2O (unlike lithium, the nitride is not formed). If burned in oxygen under pressure, sodium superoxide NaO2 will be produced. In chemistry, most sodium compounds are considered soluble but nature provides examples of many insoluble sodium compounds such as the feldspars (aluminum silicates of sodium, potassium and calcium). There are other insoluble sodium salts such as sodium bismuthate NaBiO3, sodium octamolybdate Na2Mo8O25* 4H2O, sodium thioplatinate Na4Pt3S6, sodium uranate Na2UO4. Sodium meta-antimonate's 2NaSbO3*7H2O solubility is 0.3 g/L as is the pyro form Na2H2Sb2O7*H2O of this salt. Sodium metaphosphate NaPO3 has a soluble and an insoluble form.[3]

Figure. 1. Sodium metal (ca. 10 g) under oil

2.2 Compounds

Sodium compounds are important to the chemical, glass, metal, paper, petroleum, soap, and textile industries. Hard soaps are generally sodium salt of certain fatty acids (potassium produces softer or liquid soaps).[4]

The sodium compounds that are the most important to industries are common salt (NaCl), soda ash (Na2CO3), baking soda (NaHCO3), caustic soda (NaOH), sodium nitrate (NaNO3), di- and tri-sodium phosphates, sodium thiosulfate (hypo, Na2S2O3 · 5H2O), and borax (Na2B4O7·10H2O).[4]

2.3 Spectroscopy

When sodium or its compounds are introduced into a flame, they turn the flame a bright yellow color.

One notable atomic spectral line of sodium vapor is the so-called D-line, which may be observed directly as the sodium flame-test line (see Applications) and also the major light output of low-pressure sodium lamps (these produce an unnatural yellow, rather than the peach-colored glow of high pressure lamps). The D-line is one of the classified Fraunhofer lines observed in the visible spectrum of the Sun's electromagnetic radiation. Sodium vapor in the upper layers of the Sun creates a dark line in the emitted spectrum of electromagnetic radiation by absorbing visible light in a band of wavelengths around 589.5 nm. This wavelength corresponds to transitions in atomic sodium in which the valence-electron transitions from a 3p to 3s electronic state. Closer examination of the visible spectrum of atomic sodium reveals that the D-line actually consists of two lines called the D1 and D2 lines at 589.6 nm and 589.0 nm, respectively. This fine structure results from a spin-orbit interaction of the valence electron in the 3p electronic state. The spin-orbit interaction couples the spin angular momentum and orbital angular momentum of a 3p electron to form two states that are respectively notated as 3p(2P01/2) and 3p(2P03/2) in the LS coupling scheme. The 3s state of the electron gives rise to a single state which is notated as 3s(2S1/2) in the LS coupling scheme. The D1-line results from an electronic transition between 3s(2S1/2) lower state and 3p(2P01/2) upper state. The D2-line results from an electronic transition between 3s(2S1/2) lower state and 3p(2P03/2) upper state. Even closer examination of the visible spectrum of atomic sodium would reveal that the D-line actually consists of a lot more than two lines. These lines are associated with hyperfine structure of the 3p upper states and 3s lower states. Many different transitions involving visible light near 589.5 nm may occur between the different upper and lower hyperfine levels.[5][6]

A practical use for lasers which work at the sodium D-line transition (see FASOR illustration) is to create artificial laser guide stars (artificial star-like images from sodium in the upper atmosphere) which assist in the adaptive optics for large land-based visible light telescopes.

Figure. 2. A low pressure sodium/sodium oxide (LPS/SOX) streetlamp at full power (detail)

Figure. 3. A FASOR tuned to the D2A component of the sodium D line, used at the Starfire Optical Range to excite sodium atoms in the upper atmosphere.

2.4 Isotopes

Thirteen isotopes of sodium have been recognized. The only stable isotope is 23Na. Sodium has two radioactive cosmogenic isotopes which are also the two isotopes with longest half life, 22Na, with a half-life of 2.6 years and 24Na with a half-life of 15 hours. All other isotopes have a half life of less than one minute.[7]

Acute neutron radiation exposure (e.g., from a nuclear criticality accident) converts some of the stable 23Na in human blood plasma to 24Na. By measuring the concentration of this isotope, the neutron radiation dosage to the victim can be computed.[8]

3. History

Salt has been an important commodity in human activities, as testified by the English word salary, referring to salarium, the wafers of salt sometimes given to Roman soldiers along with their other wages.

In medieval Europe a compound of sodium with the Latin name of sodanum was used as a headache remedy. The name sodium probably originates from the Arabic word suda meaning headache as the headache-alleviating properties of sodium carbonate or soda were well known in early times.[9]

Sodium's chemical abbreviation Na was first published by Jons Jakob Berzelius in his system of atomic symbols (Thomas Thomson, Annals of Philosophy[10]) and is a contraction of the element's new Latin name natrium which refers to the Egyptian natron,[9] the word for a natural mineral salt whose primary ingredient is hydrated sodium carbonate. Hydrated sodium carbonate historically had several important industrial and household uses later eclipsed by soda ash, baking soda and other sodium compounds.

Although sodium (sometimes called "soda" in English) has long been recognized in compounds, it was not isolated until 1807 by Sir Humphry Davy through the electrolysis of caustic soda.[11]

Sodium imparts an intense yellow color to flames. As early as 1860, Kirchhoff and Bunsen noted the high sensitivity that a flame test for sodium could give. They state in Annalen der Physik und der Chemie in the paper "Chemical Analysis by Observation of Spectra":

In a corner of our 60 m3 room farthest away from the apparatus, we exploded 3 mg. of sodium chlorate with milk sugar while observing the nonluminous flame before the slit. After a while, it glowed a bright yellow and showed a strong sodium line that disappeared only after 10 minutes. From the weight of the sodium salt and the volume of air in the room, we easily calculate that one part by weight of air could not contain more than 1/20 millionth weight of sodium.

Figure. 4. The flame test for sodium displays a brilliantly bright yellow emission due to the so called "sodium D-lines" at 588.9950 and 589.5924 nanometers.

4. Occurrence

Owing to its high reactivity, sodium is found in nature only as a compound and never as the free element. Sodium makes up about 2.6% by weight of the Earth's crust, making it the sixth most abundant element overall[12] and the most abundant alkali metal. Sodium is found in many different minerals, of which the most common is ordinary salt (sodium chloride), which occurs in vast quantities dissolved in seawater, as well as in solid deposits (halite). Others include amphibole, cryolite, soda niter and zeolite.

Sodium is relatively abundant in stars and the D spectral lines of this element are among the most prominent in star light. Though elemental sodium has a rather high vaporization temperature, its relatively high abundance and very intense spectral lines have allowed its presence to be detected by ground telescopes and confirmed by spacecraft (Mariner 10 and MESSENGER) in the thin atmosphere of the planet Mercury.[13]

5. Commercial production

Sodium was first produced commercially in 1855 by thermal reduction of sodium carbonate with carbon at 1100 °C, in what is known as the Deville process.[14]

Na2CO3 (liquid) + 2 C (solid) > 2 Na (vapor) + 3 CO (gas)

A process based on the reduction of sodium hydroxide was developed in 1886.[14]

Sodium is now produced commercially through the electrolysis of liquid sodium chloride, based on a process patented in 1924.[15][16] This is done in a Downs Cell in which the NaCl is mixed with calcium chloride to lower the melting point below 700 °C. As calcium is less electropositive than sodium, no calcium will be formed at the anode. This method is less expensive than the previous Castner process of electrolyzing sodium hydroxide.

Very pure sodium can be isolated by the thermal decomposition of sodium azide.[17]

Metallic sodium costs about 15 to 20 US cents per pound (US$0.30/kg to US$0.45/kg) in 1997, but reagent grade (ACS) sodium cost about US$35 per pound (US$75/kg) in 1990.

6. Applications

Sodium in its metallic form can be used to refine some reactive metals, such as zirconium and potassium, from their compounds. This alkali metal as the Na+ ion is vital to animal life. Other uses:

In certain alloys to improve their structure.

In soap, in combination with fatty acids. Sodium soaps are harder (higher melting) soaps than potassium soaps.

To descale metal (make its surface smooth).

To purify molten metals.

In some medicine formulations, the salt form of the active ingredient usually with sodium or potassium is a common modification to improve bioavailability.

In sodium vapor lamps, an efficient means of producing light from electricity (see the picture), often used for street lighting in cities. Low-pressure sodium lamps give a distinctive yellow-orange light which consists primarily of the twin sodium D lines. High-pressure sodium lamps give a more natural peach-colored light, composed of wavelengths spread much more widely across the spectrum.

As a heat transfer fluid in some types of nuclear reactors and inside the hollow valves of high-performance internal combustion engines.

Sodium chloride (NaCl), a compound of sodium ions and chloride ions, is an important heat transfer material.

In organic synthesis, sodium is used as a reducing agent, for example in the Birch reduction.

In chemistry, sodium is often used either alone or with potassium in an alloy, NaK as a desiccant for drying solvents. Used with benzophenone, it forms an intense blue coloration when the solvent is dry and oxygen-free.

The sodium fusion test uses sodium's high reactivity, low melting point, and the near-universal solubility of its compounds, to qualitatively analyze compounds.

7. Biological role

7.1 Maintaining body fluid volume in animals

The serum sodium and urine sodium play important roles in medicine, both in the maintenance of sodium and total body fluid homeostasis, and in the diagnosis of disorders causing homeostatic disruption of salt/sodium and water balance.

In mammals, decreases in blood pressure and decreases in sodium concentration sensed within the kidney result in the production of renin, a hormone which acts in a number of ways, one of them being to act indirectly to cause the generation of aldosterone, a hormone which decreases the excretion of sodium in the urine. As the body of the mammal retains more sodium, other osmoregulation systems which sense osmotic pressure in part from the concentration of sodium and water in the blood, act to generate antidiuretic hormone. This, in turn, which causes the body to retain water, thus helping to restore the body's total amount of fluid.

There is also a counterbalancing system, which senses volume. As fluid is retained, receptors in the heart and vessels which sense distension and pressure, cause production of atrial natriuretic peptide, which is named in part for the Latin word for sodium. This hormone acts in various ways to cause the body to lose sodium in the urine. This causes the body's osmotic balance to drop (as low concentration of sodium is sensed directly), which in turn causes the osmoregulation system to excrete the "excess" water. The net effect is to return the body's total fluid levels back toward normal.

7.2 Maintaining electric potential in animal tissues

Sodium cations are important in neuron (brain and nerve) function, and in influencing osmotic balance between cells and the interstitial fluid, with their distribution mediated in all animals (but not in all plants) by the so-called Na+/K+-ATPase pump.[18] Sodium is the chief cation in fluid residing outside cells in the mammalian body (the so-called extracellular compartment), with relatively little sodium residing inside cells. The volume of extracellular fluid is typically 15 liters in a 70 kg human, and the 50 grams of sodium it contains is about 90% of the body's total sodium content.

8. Dietary uses

The most common sodium salt, sodium chloride ('table salt' or 'common salt'), is used for seasoning and warm-climate food preservation, such as pickling and making jerky (the high osmotic content of salt inhibits bacterial and fungal growth). The human requirement for sodium in the diet is about 500 mg per day,[19] which is typically less than a tenth as much as many diets "seasoned to taste." Most people consume far more sodium than is physiologically needed. For certain people with salt-sensitive blood pressure, this extra intake may cause a harmful effect on health. However, low sodium intake may lead to sodium deficiency.

9. Precautions

Extreme care is required in handling elemental/metallic sodium. Sodium is potentially explosive in water (depending on quantity) and is a corrosive substance, since it is rapidly converted to sodium hydroxide on contact with moisture. The powdered form may combust spontaneously in air or oxygen. Sodium must be stored either in an inert (oxygen and moisture free) atmosphere (such as nitrogen or argon), or under a liquid hydrocarbon such as mineral oil or kerosene.

The reaction of sodium and water is a familiar one in chemistry labs, and is reasonably safe if amounts of sodium smaller than a pencil eraser are used and the reaction is done behind a plastic shield by people wearing eye protection. However, the sodium-water reaction does not scale up well, and is treacherous when larger amounts of sodium are used. Larger pieces of sodium melt under the heat of the reaction, and the molten ball of metal is buoyed up by hydrogen and may appear to be stably reacting with water, until splashing covers more of the reaction mass, causing thermal runaway and an explosion which scatters molten sodium, lye solution, and sometimes flame. (18.5 g explosion [1]) This behavior is unpredictable, and among the alkali metals it is usually sodium which invites this surprise phenomenon, because lithium is not reactive enough to do it, and potassium is so reactive that chemistry students are not tempted to try the reaction with larger potassium pieces.

Sodium is much more reactive than magnesium; a reactivity which can be further enhanced due to sodium's much lower melting point. When sodium catches fire in air (as opposed to just the hydrogen gas generated from water by means of its reaction with sodium) it more easily produces temperatures high enough to melt the sodium, exposing more of its surface to the air and spreading the fire.

Few common fire extinguishers work on sodium fires. Water, of course, exacerbates sodium fires, as do water-based foams. CO2 and Halon are often ineffective on sodium fires, which reignite when the extinguisher dissipates. Among the very few materials effective on a sodium fire are Pyromet and Met-L-X. Pyromet is a NaCl/(NH4)2HPO4 mix, with flow/anti-clump agents. It smothers the fire, drains away heat, and melts to form an impermeable crust. This is the standard dry-powder canister fire extinguisher for all classes of fires. Met-L-X is mostly sodium chloride, NaCl, with approximately 5% Saran plastic as a crust-former, and flow/anti-clumping agents. It is most commonly hand-applied, with a scoop. Other extreme fire extinguishing materials include Lith+, a graphite based dry powder with an organophosphate flame retardant; and Na+, a Na2CO3-based material.

Because of the reaction scale problems discussed above, disposing of large quantities of sodium (more than 10 to 100 grams) must be done through a licensed hazardous materials disposer. Smaller quantities may be broken up and neutralized carefully with ethanol (which has a much slower reaction than water), or even methanol (where the reaction is more rapid than ethanol's but still less than in water), but care should nevertheless be taken, as the caustic products from the ethanol or methanol reaction are just as hazardous to eyes and skin as those from water. After the alcohol reaction appears complete, and all pieces of reaction debris have been broken up or dissolved, a mixture of alcohol and water, then pure water, may then be carefully used for a final cleaning. This should be allowed to stand a few minutes until the reaction products are diluted more thoroughly and flushed down the drain. The purpose of the final water soaking and washing of any reaction mass or container which may contain sodium, is to ensure that alcohol does not carry unreacted sodium into the sink trap, where a water reaction may generate hydrogen in the trap space which can then be potentially ignited, causing a confined sink trap explosion.

10. Conclusion

As an individual representative of the periodic table of chemical elements Dmitry Ivanovich Mendeleyev, the element has unique chemical and physical properties

Element is of great economic importance and plays a major role in world culture

11. References

"Los Alamos National Laboratory - Sodium". http://periodic.lanl.gov/elements/11.html. Retrieved 2007-06-08.

"Sodium found in Mercury's atmosphere". BNET. 1985-08-17. http://findarticles.com/p/articles/mi_m1200/is_v128/ai_3898126. Retrieved 2008-09-18.

a b David E. Newton. Chemical Elements. ISBN 0-7876-2847-6.

a b Eggeman, Tim. Sodium and Sodium Alloys. Kirk-Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. Published online 2007. doi:10.1002/0471238961.1915040912051311.a01.pub2

a b Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils; (1985). "Natrium" (in German). Lehrbuch der Anorganischen Chemie (91-100 ed.). Walter de Gruyter. pp. 931-943. ISBN 3-11-007511-3.

Audi, Georges (2003). "The NUBASE Evaluation of Nuclear and Decay Properties". Nuclear Physics A (Atomic Mass Data Center) 729: 3-128. doi:10.1016/j.nuclphysa.2003.11.001.

Citron, M. L., et al. (1977). "Experimental study of power broadening in a two level atom". Physical Review A 16: 1507. doi:10.1103/PhysRevA.16.1507. http://prola.aps.org/abstract/PRA/v16/i4/p1507_1.

CRC Handbook of Chemistry and Physics, 2004

Daniel A. Steck. "Sodium D. Line Data" (PDF). Los Alamos National Laboratory (technical report). http://george.ph.utexas.edu/~dsteck/alkalidata/sodiumnumbers.pdf.

Davy, Humphry (1808). "On some new Phenomena of Chemical Changes produced by Electricity, particularly the Decomposition of the fixed Alkalies, and the Exhibition of the new Substances, which constitute their Bases". Philosophical Transactions of the Royal Society of London 98: 1-45. doi:10.1098/rstl.1808.0001. http://books.google.com/books?id=Kg9GAAAAMAAJ.

Endt, P. M. ENDT, ,1 (1990) (12/1990). "Energy levels of A = 21-44 nuclei (VII)". Nuclear Physics A 521: 1. doi:10.1016/0375-9474(90)90598-G.

Lange's Handbook of Chemistry

Merck Index, 9th ed., monograph 8325

Pauling, Linus, General Chemistry, 1970 ed., Dover Publications

Prof. N. De Leon. "Reactivity of Alkali Metals". Indiana University Northwest. http://www.iun.edu/~cpanhd/C101webnotes/modern-atomic-theory/alkali-reac.html. Retrieved 2007-12-07.

Sanders, F. W.; Auxier, J. A. (1962). "Neutron Activation of Sodium in Anthropomorphous Phantoms". Health Physics 8 (4): 371-379. doi:10.1097/00004032-196208000-00005. http://www.health-physics.com/pt/re/healthphys/abstract.00004032-196208000-00005.htm.

van der Krogt, Peter. "Elementymology & Elements Multidict". http://www.vanderkrogt.net/elements/elem/na.html. Retrieved 2007-06-08.